The VC700 cuttings dryer produced by Xi ‘an Kesun is used to reduce the operator’s total drilling fluid cost and limit the amount of waste disposal.
The VC700 cuttings dryer is used to recover drilling fluid directly from cuttings and weight mud from the shaker mesh to avoid loss of weight mud due to shaker failure, rig movement, or screen blockage. The VC700 cuttings dryer helps meet certain cuttings liquid discharge requirements and automatically controls the feed for solid-liquid separation. The cuttings dryer is used to recover the liquid phase drilling fluid from the cuttings by applying a high centrifugal acceleration force to the cuttings to improve the separation of liquid from the cuttings. The VC700 chip dryer can help save money on expensive drilling fluids by further purifying the expensive liquid phase that can be returned to the mud system in use.
The VC700 cuttings dryer system recovers lost mud and returns it to the in-service mud system. For diesel, mineral oil, and synthetic oil base mud, the recovery system can work well. Because it is easier to separate oil from large drill cuttings, the cuttings dryer proved to be more effective for the synthesis of oil-based mud. Synthetic oil-based mud systems also have a higher mud value, making the machine more attractive from an economic point of view. In addition, the system reduces the amount of waste and disposal costs incurred on the rig site.